I'm wondering if a film that has loose take up, and is wound tightly, using a bench rewind, will eventually cure the problem?
I'm wondering if a film that has loose take up, and is wound tightly, using a bench rewind, will eventually cure the problem?
Posts: | 1.113 |
Points: | 3.214 |
Date registered | 05.19.2018 |
home: | United Kingdom |
ThankYou | 176 |
A clean and a manual wind normally sorts it I find, as I've been going through a few films lately I've noticed rewinding on the projector with films I haven't watched in a while normally loose wind and don't fit on the reel so well,after a clean they are fine,Mark
I would say so too Robert, I too use rewinds for both 8mm and 16mm and never have a problem with loose film on the reel.
Posts: | 972 |
Points: | 4.227 |
Date registered | 07.18.2017 |
ThankYou | 137 |
Posts: | 1.113 |
Points: | 3.214 |
Date registered | 05.19.2018 |
home: | United Kingdom |
ThankYou | 176 |
Here's a trick with loose take up. Twist the film before encoring to the take-up spool. This is also useful with 16mm film which is slightly warped.
Posts: | 817 |
Points: | 1.072 |
Date registered | 07.08.2017 |
home: | Bristol, United Kingdom |
ThankYou | 221 |