Is anyone else suffering from this I do not seem to be able to upload pictures taken
Can’t upload latest pics of 35mm film run.
Is anyone else suffering from this I do not seem to be able to upload pictures taken
Can’t upload latest pics of 35mm film run.
Posts: | 1.537 |
Points: | 4.718 |
Date registered | 08.03.2015 |
home: | Devon |
ThankYou | 275 |
Not tried for a while sorry Gwyn, but I will hopefully have time later to place a test photo from my pc just to see if it's a server issue again.
Hopefully someone else may be able to test sooner for you with a little luck.
"C'Mon Baggy, Get With The Beat"
Could not upload either, complained to Xobor, as it now happened twice in a month or so
Posts: | 5.705 |
Points: | 12.970 |
Date registered | 08.02.2015 |
home: | Sarpsborg, Norway |
ThankYou | 349 |
Posts: | 918 |
Points: | 3.434 |
Date registered | 08.03.2015 |
home: | Nättraby, Sweden |
ThankYou | 112 |
Posts: | 1.537 |
Points: | 4.718 |
Date registered | 08.03.2015 |
home: | Devon |
ThankYou | 275 |
All now seems Ok for me anyway hope this has not caused a problem for anyone else.
Posts: | 1.537 |
Points: | 4.718 |
Date registered | 08.03.2015 |
home: | Devon |
ThankYou | 275 |
Gwyn
Is it true that the mauve version of the Hokushin SC-10 (which was introduced in 1973) uses the EJL 200 watt lamp?
The mauve version was superseded by the blue version in 1981 which uses the ELC 250 watt lamp.
Posts: | 817 |
Points: | 1.072 |
Date registered | 07.08.2017 |
home: | Bristol, United Kingdom |
ThankYou | 221 |
Maurice,
Yes Maurice I can confirm my machine has a 24volt 200 watt ejl bulb.
Nice machine but mine is only kind to good clean prints,does not like splices or pulled sprocket holes,in fact anything that stops the smooth run of the film.
Posts: | 1.537 |
Points: | 4.718 |
Date registered | 08.03.2015 |
home: | Devon |
ThankYou | 275 |